To allow rapid entry of as many as 15 characters into a program with one keystroke by redefining GW-BASIC special function keys.
KEY key number,string expression KEY n,CHR$(hex code)+CHR$(scan code) KEY ON KEY OFF KEY LIST
key number is the number of the key to be redefined. key number may range from 1-20.
string expression is the key assignment. Any valid string of 1 to 15 characters may be used. If a string is longer than 15 characters, only the first 15 will be assigned. Constants must be enclosed in double quotation marks.
scan code is the variable defining the key you want to trap. Appendix H in the GW-BASIC User's Guide lists the scan codes for the keyboard keys.
hex code is the hexadecimal code assigned to the key shown below:
|SHIFT||&H01, &H02, &H03|
Hex codes may be added together, such as &H03, which is both shift keys.
Initially, the function keys are assigned the following special functions:
¿ (arrow) means that you do not have to press RETURN after each of these keys has been pressed.
Any one or all of the 10 keys may be redefined. When the key is pressed, the data assigned to it will be input to the program.
KEY key number, "string expression"
Assigns the string expression to the specified key.
List all 10 key values on the screen. All 15 characters of each value are displayed.
Displays the first six characters of the key values on the 25th line of the screen. When the display width is set at 40, five of the 10 keys are displayed. When the width is set at 80, all 10 are displayed.
Erases the key display from the 25th line, making that line available for program use. KEY OFF does not disable the function keys.
If the value for key number is not within the range of 1 to 10, or 15 to 20, an "Illegal function call" error occurs. The previous KEY assignment is retained.
Assigning a null string (length 0) disables the key as a function key.
When a function key is redefined, the INKEY$ function returns one character of the assigned string per invocation. If the function key is disabled, INKEY$ returns a string of two characters: the first is binary zero; the second is the key scan code.
10 KEY 1, "MENU"+CHR$(13)
Displays a menu selected by the operator each time key 1 is pressed.
1 KEY OFF
Turns off the key display.
10 DATA KEY1, KEY2, KEY3, KEY4, KEY5 20 FOR N=1 TO 5: READ SOFTKEYS$(n) 30 KEY N, SOFTKEYS$(I) 40 NEXT N 50 KEY ON
Displays new function keys on line 25 of the screen.
20 KEY 1, ""
Disables function key 1.