Earlier Versions of Generic Cad May Not Work with InPort (32129)
The information in this article applies to:
• Microsoft Mouse driver for MS-DOS 7.x
• Microsoft Mouse driver for MS-DOS 8.x
• Microsoft InPort Mouse 1.x
This article was previously published under Q32129
Generic Software, maker of Generic CAD, recommends Interrupt 3 for the J4
setting of the bus mouse.
Be aware that older versions (possibly releases 1 and 2) of Generic Cad may
not work correctly with versions of the bus mice that include the InPort
Interface. Because Generic CAD goes directly to the hardware (that is, it
uses its own mouse driver), you must obtain an update to release 1 or 2.
To obtain an update, please contact Generic Software.
The Generic CAD product included here is manufactured by a vendor
independent of Microsoft; we make no warranty, implied or otherwise,
regarding this product's performance or reliability.
| Modification Type:
|| Last Reviewed: