The Tentime SCSI host adapter TNT-4000 series is configurable for
several ranges, which are as follows:
------- 14 15 16 17 18 19
C800 O F O O F F Default
D000 O O F O F F
D800 O F F O F F
E000 O O O F F F
E800 O F O F F F
To use EMM386.EXE to load device drivers high, be sure to exclude
the range used by the SCSI host adapter. For example, if the card
is jumpered for the default settings, exclude the address range
by using the following device line in the CONFIG.SYS file.
DEVICE=C:\DOS\EMM386.EXE NOEMS X=C800-C9FF
Other switches, including RAM, may still be used in conjunction
with the X= switch.
The Tentime is also configurable for its interrupt and I/O address
range usage. It can use the following:
3, 4, 5, 7, 10, 11, 12, 14, 15
I/O address ports
300, 310, 320, 330, 340, 350, 360, 370, 380, 390, 3A0, 3B0, 3C0
The Tentime adapter also uses a device driver, SSTBIO.SYS, to take
advantage of its enhanced features. This device driver is NOT
essential to use the adapter. SSTBIO.SYS has been successfully loaded
high using EMM386.EXE.