MSBACKUP--Notes Must start MSBACKUP from a hard disk MSBACKUP program files must be located on your hard disk. You cannot start MSBACKUP from a floppy disk. Backup catalogs As part of the backup process, MSBACKUP creates a backup catalog that contains information about the files you backed up. When you need to restore one or more files, you can load the backup catalog and easily select files from a backup set. The backup catalog includes information about the: Backed-up disk's directory structure. Names, sizes, and attributes of the directories and files that were selected. Total number of files. Total size of the backup. Name of the setup file that was used. Date the backup was made. MSBACKUP gives each catalog file a unique name that helps you identify a backup set. Each character in the catalog name contains information about a particular backup set. For example, consider a typical catalog name such as CD20823A.FUL. Reading left to right, the character(s) in the filename mean the following: Character(s) Meaning C The first drive backed up in this set. D The last drive backed up in this set. (If only one drive was backed up, this letter will be the same as the first drive that was backed up.) 2 The last digit of the year, as determined by the system date. In the example, the year is 1992. 08 The month the backup set was created. 23 The day of the month the backup set was created. A The position in the sequence of this backup. If more than one backup of the same drive(s) is performed on the same day and the Keep Old Backup Catalogs option is set to On, MSBACKUP assigns a letter from A to Z to indicate the order in which the backups were performed (A is the first backup you created that day, B is the second, C the third, and so on). If the Keep Old Backup Catalogs option is set to Off, this alternates between A and B. FUL The backup type--FUL indicates a full backup, INC indicates an incremental backup, and DIF indicates a differential backup. You can easily locate the catalog for a backup set by using the information contained in the catalog filenames, even if you have many catalog files in your directory. Each time you perform a full backup using a specific setup file, MSBACKUP creates a master catalog. The master catalog keeps track of all the backup catalogs made during the backup cycle. When the next full backup is performed and a new backup cycle begins, a new master catalog is created. The master catalog is used if you need to restore a complete backup cycle. When you load the master catalog, the catalogs of all the backups that were created during the backup cycle are automatically merged. Then the latest version of each backed-up file can be automatically restored (or you can choose to restore an earlier version). You can choose whether you want to keep all of the old catalogs or only the current catalogs on your hard disk. The catalogs will remain part of your backup sets. When you back up files, MSBACKUP places one copy of the backup catalog on your hard disk, and a second copy on the disk or network drive that contains your backup set. Restoring backups created by MS-DOS 6 or 6.2 Backup programs MS-DOS 6.22 Backup uses a different backup compression format from MS-DOS 6 and 62. Backup. The MS-DOS 6.22 Backup programs use the DriveSpace compression format; earlier versions of Backup used the DoubleSpace compression format instead. Because of this, MS-DOS 6.22 Backup for Windows cannot restore compressed backups created by MS-DOS 6 or 6.2 Backup. MS-DOS 6.22 Backup for MS-DOS can restore earlier compressed backups only if one of the following conditions is true: DoubleSpace is installed (DBLSPACE.BIN is loaded in memory). The files DBLSPACE.BIN and DRVSPACE.MR1 are available. (For more information on DRVSPACE.MR1, see the README.TXT file.) Both the Windows and MS-DOS versions of MS-DOS 6.22 Backup can successfully restore MS-DOS 6, 6.2 and 6.21 backups made without backup data compression. If you unchecked the Compress Backup Data box in the Backup Options dialog before you backed up, you should have no problems restoring your data using the MS-DOS 6.22 Backup programs. If you try to restore an older compressed backup and Microsoft Backup displays an error message, you need to use the MS-DOS 6 or 6.2 versions of Backup instead. If you do not currently have one of these versions of Backup on your computer, you will need to retrieve the older version of Backup from your MS-DOS 6 or 6.2 distribution disks. For more information, see the README.TXT file (located in the directory that contains your MS-DOS files). Restoring backups made by using the BACKUP.EXE program Neither MSBACKUP.EXE nor MWBACKUP.EXE can restore backups made by using the BACKUP.EXE program that came with MS-DOS version 5 and earlier. For information about restoring such backups, see the command. Exchanging backups with MS-DOS 6, 6.2, or 6.21 systems If you plan to use either MSBACKUP.EXE or MWBACKUP.EXE to exchange backup files with other MS-DOS 6.x systems, you should disable backup compression before backing up. In the Backup dialog, select the Options button, clear the Compress Backup Data check box, and select OK. Insufficient memory If you receive a message stating that you have insufficient memory, do the following: 1 Make sure you have at lease 512K of memory on your computer. 2 Quit MSBACKUP, remove all memory-resident programs from memory, and try using MSBACKUP again. 3 Choose the Options button on the Backup screen to display the Disk Backup Options dialog box. Turn off the Compress Backup Data option and then choose OK. The MSDOSDATA environment variable Backup for MS-DOS uses the MSDOSDATA environment variable to determine the location of configuration information, backup sets, and catalogs. Backup for MS-DOS first searches for the MSDOSDATA environment variable. If this environment variable is not defined, the program searches the directory from which you started the program. If the program does not find the file, the program creates it using default values and places it in the directory. The MSDOSDATA environment variable is useful if you share the Backup for MS-DOS program files with others, but use your own configuration. For example, suppose the program files are located on drive P, a read-and-execute-only network server, and you want to use your own configuration, backup sets, and catalogs. To specify that Backup for MS-DOS use the configuration information, backup sets, and catalogs located in the BACKUP directory on your drive C, add the following line to your AUTOEXEC.BAT file: set msdosdata=c:\backup To start Backup for MS-DOS, type the following at the command line: p:\msbackup Changes you make to the configuration of Backup for MS-DOS are saved in the BACKUP directory on drive C.